Know How
Good products help businesses grow
Dead-Weight Tester
PR60 dead-weight tester can meter pressure gauges and transducers from 0~60 MPa, the minimum pressure is 1MPa. Each calibration will be set automatically or user defined pressure. Accuracy: 0.05%,0.02%,0.01%,0.005% selectable.
QTZ Series pneumatic type dead-weight tester is used as pressure references in factories and calibration laboratories for testing. It's sensitivity up to 10 mg, with filter to prevent dust from device. Equipped with vacuum and positive changeover valves to switch pressure. Provide pressure range from 6bar to 100bar. Accuracy: 0.05%,0.02%,0.01%,0.005% selectable.
CW Series dead-weight tester works by hydraulic or water-driven, compact benchtop pressure source with a wide range of ranges, provide pressure range from 6 bar to 1600 bar. it's capable of simultaneous testing of two gauges with quick connectors, anti-breakage piston rods, built-in starter pumps can pre-pressure to save time, the fine pressure trimming down to 0.1bar. Additionally, there's a 2500bar reinforced type option.
PR250 dead-weight tester can meter pressure gauges and transducers from 0~250MPa, the minimum pressure is 2MPa. Each calibration will be set automatically or user defined pressure. Accuracy: 0.02%,0.01%,0.005% selectable.
PR Series automatic dead-weight tester is a robot which can gas-driven loading, unloading and rotating weights. Mirror-polished surface weights, anti-dust and keep long term stability. The weights monitoring system displays the weights condition. Anti-broke piston system, control system for prevent disoperation, and ambient condition monitoring. A 7" TFT touchscreen was provided for interface.
Portable Hand Pump
V17 portable hand pumps use oil or water as a medium and can facilitate the generation of high pressure anytime and anywhere. The range is from 0~700bar, there're two connections for pressure output. Pressure is generated by rod, and a fine-tuning knob is used for fine adjustment.
CW8530 Series air-mediated hand pumps are suitable for applications with hygienic requirements. It can be switched between positive and negative pressure, and the fine-tuning knob allows for a minimum pressure adjustment of 10Pa.
CW8530 range: -0.01~0.01bar\-0.05～0.05bar\-0. 1～0. 1bar
CW8530A range: -0.4～0.4bar\-0.6～0.6bar
V18 portable hand pumps use air as a medium and can facilitate the generation of high pressure anytime and anywhere. Under a switch valve, it can generate a pressure from -0.95bar to 140bar. Equip a digital pressure gauge it can become a pressure calibrator.
Pressure Calibrator
CWY-300 is a high precision multi-function automatic pressure calibrator with data storage, built-in rechargeable battery, and optional 0.1%FS or 0.05%FS pressure accuracy within the range of 0~700bar.
It can be supplied with 24VDC power supply to an external pressure transmitter and collect the current or voltage output signal of the transmitter, the 7-digit digital display with backlight shows the pressure and output at the same time during pressure calibration.
Pressure Scanner
The PIS132 Pressure Scanner provides measurement, calibration, and purge functions.
The purge function removes water and contaminants from the gas line. The sensor output signal is temperature-compensated by an integrated MCU and a high-accuracy ADC, and is output over Ethernet (TCP/IP).
The instrument can be used for wind tunnel testing, compressor testing, aero-engine testing.
Kümago Nexus GmbH
Tel : +49 211 540747 030 Fax : +49 211 540747 14 Mail : info@kuemago.com Addr : Breite Straße 22, 40213 Düsseldorf, Deutschland
@2024 Kümago All rights reserved. Terms & Conditions Privacy Policy Kümago Impressum
Wir benötigen Ihre Zustimmung zum Laden der Übersetzungen
Wir nutzen einen Drittanbieter-Service, um den Inhalt der Website zu übersetzen, der möglicherweise Daten über Ihre Aktivitäten sammelt. Bitte überprüfen Sie die Details in der Datenschutzerklärung und akzeptieren Sie den Dienst, um die Übersetzungen zu sehen.