+49 211 540747 030
info@kuemago.com
XGZP-160 Surface Mount Pressure Sensor
-100kPa～0kPa…10kPa…700kPa
Pressure type (positive & vacuum)
For non-corrosive gas or air
Working temperature: -30℃～+105℃
Embedded OEM design
Low cost for high volume
XGZP160 is a surface mounting pressure sensor based on CFSensor silicon based piezoresistive pressure sensor die. The sensor die is bonded on a substrate with a plastic cap and packaged in a 6-pin SOP or DIP. The small size and high reliability of on-chip integration make this sensor a simple and economical choice for high volume application in a variety of industries. With standard SOP6 or DIP6 package, XGZP160 is easy for users to install by SMT or through hole board assembly.
With good repeatability, linearity, stability and sensibility, XGZP160 is very facile for users to calibrate output & thermal drift and make temperature compensation by using exterior operational amplifier or integrated circuit.(For calibrated pressure sensor if required, please refer to CFSensor calibrated pressure sensor products series)
The XGZP160 pressure sensor is intended for using with non-corrosive gas or air. It is highly prohibited to choke the side of pressure diaphragm during actual application. Please consult CFSensor if a pressure medium other then air is to be used.
| CHARACTERISTIC | MIN | TYP. | MAX | UNIT | |
|---|---|---|---|---|---|
| Pressure Range① | 10; 40; 100; 200; 700 | kPa | |||
| 1.5; 5.8; 15; 30; 100 | PSI | ||||
| 75; 300; 750; 1500… | mmHg | ||||
| Supply Voltage | 0.3 | 5 | 15 | Vdc | |
| Supply Current | 0.06 | 1 | 3 | mA | |
| Working Temperature | -30/-22 | – | +125/257 | ℃/℉ | |
| Storage Temperature | -40/-40 | – | +140/284 | ℃/℉ | |
| Bridge Resistance | 4 | 5 | 6 | kΩ | |
| Offset/Zero Output | -5 | – | +10 | mV | |
| FS Output | 10kPa | 35 | 50 | 65 | mV |
| 40kPa | 55 | 65 | 75 | mV | |
| 100/200kPa | 60 | 90 | 120 | mV | |
| 700kPa | 30 | 45 | 60 | mV | |
| Over Pressure② | ≤100kPa | – | 3X | – | FS |
| 200kPa | – | 2X | – | FS | |
| 700kPa | – | 1.5X | – | FS | |
| Burst Pressure② | ≤100kPa | – | 5x | – | FS |
| 200kPa | – | 3X | – | FS | |
| 700kPa | – | 2X | – | FS | |
| Pressure Cycle③ | One million | Times | |||
| Temp. Coefficient of Resistance | 1600 | 2100 | 2600 | ppm/℃ | |
| TCO(Temp. Coefficient of Offset)④ | -0.05 | ±0.02 | 0.05 | %FS/℃ | |
| TCS(Temp. Coefficient of Span)④ | -0.05 | ±0.02 | 0.05 | %FS/℃ | |
| Linearity⑤ | 10kPa | -1.0 | ±0.50 | 1.0 | %FS |
| 40,100,200,700kPa | -0.3 | ±0.15 | 0.3 | %FS | |
| Hysteresis | -0.3 | ±0.15 | 0.3 | %FS | |
| Repeatability | -0.3 | ±0.15 | 0.3 | %FS | |
| ESD(HBM) | – | ±2 | – | KV | |
| Medium Compatibility | Pressure side | Air and non-corrosive gas | |||
| Reference side | Air and non-corrosive gas( no condensation) | ||||
| Note: ① The vacuum/negative pressure measurement is available ② The indicated value is regarded as a widespread value, contact CFSensor for more information on specific pressure range. ③ Base on laboratory test, actual pressure cycles or life depends on operating environment and conditions ④ Temperature coefficient is measured from 0℃ to 60℃ and driven by constant current. ⑤ Defined as best fit straight line | |||||
RELATED PRODUCTS
Key specifications
| Pressure type | Gauge (incl. vacuum) |
|---|---|
| Package / mounting | SOP (SMD, size n/a) |
| Media | Non-corrosive gas / air |
