+49 211 540747 030
info@kuemago.com
XGZP-195 Pressure Sensor
0～10/50/100/200kPa
Gauge pressure type
Barbed inlet pipe
Laser-trimmed mV output
Easy to embed in OEM equipment
XGZP194 is a surface mounting pressure sensor based on CFSensor silicon piezoresistive pressure sensor die. The sensor die is bonded on a substrate with a plastic cap and packaged in a 8-pin SIP housing.
The sensor’s zero output, full-scale output, temperature drift and other parameters have been calibrated and compensated by laser trimming. The sensor generates a high-precision standard voltage output signal proportional to the supply voltage.
The small size and high reliability of integration make this sensor a simple and economical choice for high volume application in a variety of industries. With standard SMD PIN, XGZP194 is easy for users to install by board mounting.
The XGZP194 pressure sensor is intended for use with non-corrosive gas or air. It is highly prohibited to choke the side of pressure diaphragm during actual application. Please consult us if a pressure medium other then air is to be used.
| CHARACTERISTIC | MIN | TYP. | MAX | UNIT | |
|---|---|---|---|---|---|
| Pressure Range | 0~10/50/100/200 | kPa | |||
| Working Voltage | – | 10 | 16 | Vdc | |
| Supply Current(10Vdc) | – | 0.5 | 1 | mA | |
| Working Temperature | -30 | – | +85 | ℃ | |
| Storage Temperature | -40 | – | +105 | ℃ | |
| Offset/Zero Output | -1 | 0 | +1 | uV/℃ | |
| FS Output① | 38.5 | 40 | 41.5 | mV | |
| Sensitivity | 0~10kPa① | — | 4 | — | mV/kPa |
| 0~50kPa | — | 0.8 | — | ||
| 0~100kPa | — | 0.4 | — | ||
| 0~200kPa | — | 0.2 | — | ||
| Over Pressure | – | 2X | – | FS | |
| Burst Pressure | – | 3x | – | FS | |
| TCO(Temp. Coefficient of Offset)② | -20 | – | +20 | uV/℃ | |
| TCS(Temp. Coefficient of Span) ② | -20 | – | +20 | uV/℃ | |
| Linearity③ | -0.5 | ±0.2 | 0.5 | %FS | |
| Hysteresis | -0.3 | ±0.15 | 0.3 | %FS | |
| Repeatability | -0.3 | ±0.15 | 0.3 | %FS | |
| Input Impedance | 12 | 32 | kΩ | ||
| Output Impedance | 4.5 | 5.5 | kΩ | ||
| Response Time(T90) | — | 1.0 | — | ms | |
| ESD(HBM) | – | ±2 | – | KV | |
| ① The Full-Scale output of 0~10kPa can be customized with 25mV and 2.5mV/kPa sensitivity ② Temperature coefficient is measured from 0℃ to 60℃. ③ Defined as best fit straight line | |||||
RELATED PRODUCTS
Key specifications
| Output signal | Analog mV (unamplified) |
|---|---|
| Pressure type | Gauge |
