FS5002 MEMS Mass Flow Sensor

MEMS gas mass flow sensor with 10 sccm full scale Flow range 0 ~ 10 to 1000 sccm, turn-down ratio 100:1 Accuracy ±(2.0+0.5FS) %, response time 5 msec FS5002 8 ~ 15 Vdc, low power FS5002L 2.7 ~ 5.5 Vdc Temperature -25 ~ +85 °C, pressure up to 0.5 MPa Overflow 3000 sccm, RoHS and REACH compliant

FS1100 MEMS Mass Flow Sensor

Bidirectional gas mass flow measurement Flow range -250 … +250 SLPM Accuracy ±(2.0+0.5FS) % total error band Analog 0.5 ~ 2.5 Vdc and I2C output Integrated temperature output, ±2.5 °C 16 bit resolution, 5 msec response time

FS4001E MEMS Mass Flow Sensor

MEMS gas mass flow sensor, full scale 30 to 1000 sccm Accuracy ±(1.5+0.5FS) %, turn-down ratio 100:1 Response time 65 msec, 4 / 8 / 16 / 33 / 131 selectable 8 ~ 24 Vdc supply, analog 0.5 ~ 4.5 Vdc, RS232 and I2C Working pressure -0.08 ~ +0.5 MPa, temperature -10 ~ +55 °C Hose coupling (barbed) port, 15 g, RoHS and REACH compliant

FS4308 MEMS Mass Flow Sensor

Compact MEMS gas mass flow sensor, 2 to 50 SLPM Accuracy ±(1.5+0.15FS) %, repeatability 0.5+0.05FS % Analog 1 ~ 5 Vdc, RS485 Modbus, RS232 or I2C Maximum pressure 0.8 MPa, protection class IP40 R 1/4" BSPT or 4 / 6 / 8 mm one-touch fittings Working temperature -10 to +60 °C, response time 10 msec

FS5001E MEMS Mass Flow Sensor

MEMS thermal mass flow sensor for manifold installation Full scale 200 sccm to 15000 sccm, up to 15 SLPM Accuracy ±(2.0+0.5FS) %, turn-down ratio 100:1 Analog 0.5 ~ 4.5 Vdc or I2C output, 8 ~ 24 Vdc supply Pressure range -0.08 ~ 0.5 MPa, burst pressure 1.0 MPa Stainless steel mounting plate and O-rings included

FS8000 MEMS Mass Flow Sensor

MEMS thermal mass flow sensor with 5 ms response time Ranges 0 – 30/100/200/500 sccm and 0 – 4/5/6 SLPM Accuracy ±(2.0+0.5FS) %, repeatability (0.5+0.15FS) % Linear I2C plus 0.5 – 4.5 V analog (FS8001/FS8003E) FS8001N answers in 1 ms with a non-linear analog output Supply 8 – 24 Vdc, <20 mA, M5 or BSPT 1/8 in connection

FS7002 MEMS Mass Flow Sensor

MEMS thermal mass flow sensor for open-space airflow Flow speed 0 – 5, 0 – 10 or 0 – 15 m/s, selectable Analog non-linear output (FS7002) or I2C linear (FS7002L) Response time 20 ms; supply 5 V (FS7002) or 3.0 – 3.6 V Power consumption below 50 mW, working current about 10 mA RoHS compliant; −10 to +70 °C working temperature

FS1015E MEMS Mass Flow Sensor

Direct gas mass flow measurement
Flow range 0 ~ 100 or 0 ~ 150 SLPM
Accuracy ±(2.0+0.5FS) % total error band
I2C and analog 0.5 ~ 4.5 Vdc output
1300 Pa pressure drop at 150 SLPM
8 msec response, 100:1 turn-down ratio

XGZF-4000 Air Flow Sensor

MEMS thermal mass flow technology Flow range: 5 to 500 SLM Analog or digital output Unidirectional or bidirectional flow Fast response and high sensitivity Stable and reliable performance

XGZF-3000 Air Flow Sensor

MEMS thermal mass flow technology Flow range: 100 to 3000 SCCM Analog or digital output Uni- or bidirectional measurement Fast response and high sensitivity Stable and reliable performance

Gas Mass Flow Sensors — MEMS sensing elements for OEM gas paths

This group covers thermal MEMS mass flow sensors that measure gas mass flow directly, without temperature or pressure compensation. They are built into ventilators, analysers, leak detectors and process instruments rather than installed as finished instruments, so the mechanical interface and the electrical output matter as much as the range. Flow ranges start at a few sccm and reach 250 SLPM.

Outputs include analogue 0.5–2.5 VDC, I²C and digital interfaces; some series also report gas temperature. Because the sensor sits in the gas path, pressure drop and the maximum working pressure decide whether a model fits a given manifold. Selection normally starts with three values: the gas, the full-scale flow and the mounting. The specification table on each product page reproduces the manufacturer’s technical data, and the datasheet adds dimensions and ordering codes.