Product categories
Product tags
Recently Viewed Products
MFC4000 Gas Mass Flow Controller
MEMS thermal mass flow controller
Full scale 50 to 500 mLn/min
Turn-down ratio 100:1
Normally closed control valve
UNF 10-32 female connection
45 x 45.5 x 20 mm body
The MFC4000 is a miniature thermal MEMS mass flow controller for non-corrosive gases. It measures and controls mass flow directly, without temperature or pressure compensation, and holds the setpoint with a normally closed control valve. Full scale runs from 0 ~ 50 mLn/min up to 0 ~ 500 mLn/min.
It mounts inline in the gas line through UNF 10-32 female ports and takes an analog 0 ~ 5 Vdc or 4 ~ 20 mA setpoint, or a digital RS485 command. Control pressure range is 0.1 ~ 0.8 MPa with a maximum operating differential pressure of 0.4 MPa, the settling time is 100 msec, and maximum pressure loss is 22 kPa on the 500 mLn/min models.
Three values decide the variant: the full scale, the input signal (analog 0 ~ 5 Vdc, 4 ~ 20 mA or digital RS485), and the electrical interface — a single DB9 connector, with 8 ~ 24 Vdc supply. Accuracy is ±1.0% r.d. and ±0.2% f.s.; repeatability is ±0.3% r.d. and ±0.06% f.s.
Technical data as published in the manufacturer manual (section 7).
| Full-scale range | 0 ~ 50 mLn/min … 0 ~ 500 mLn/min |
|---|---|
| Accuracy | ± 1.0% r.d. (20 ~ 100% of full scale); ±0.2% f.s. (<20% of full scale) |
| Repeatability | ± 0.3% r.d. (20 ~ 100% of full scale); ±0.06% f.s. (<20% of full scale) |
| Turn-down ratio | 100:1 |
| Max control range | 102 %FS |
| Control pressure range | 0.1 ~ 0.8 MPa |
| Maximum operating differential pressure | 0.4 MPa |
| Setpoint source (input signal) | Analog: 0 ~ 5 Vdc or 4 ~ 20 mA; Digital: RS485 |
| Settling time | 100 msec |
| Working temperature | 0 ~ 55 °C |
| Humidity | <95, no condensation %RH |
| Burst pressure | 1.5 MPa |
| Max pressure loss | 22 (500 mLn/min models) kPa |
| External leakage rate (He) | ≤1 * 10⁻⁹ Pa·m³/s |
| Power supply | 8 ~ 24 Vdc |
| Output signal | Analog: 0 ~ 5 Vdc or 4 ~ 20 mA; Digital: RS485 |
| Max null shift (analog) | ±30 mVdc |
| Control valve | Normally Closed (NC) |
| Electrical connector | DB9 |
| Mechanical connection | UNF 10-32-female |
| Protection | IP40 |
| Storage temperature | -20 ~ +70 °C |
| Reference conditions | 0 °C, 101.325 kPa, air |
| Fluid compatibility | Non-corrosive |
| CE | EN61000-2; -3; -4 |
| Environmental | RoHS, REACH |

