Product categories
MF4500 Gas Mass Flow Meter
MEMS thermal mass flow meter, BSPT inline
MF4512 100 to 300 SLPM, MF4519 500 to 1000 SLPM
Accuracy ±(2.0+0.5FS) %
Turn-down ratio 50:1
RS485 Modbus half-duplex output
IP40 body, BSPT 1/2 and 3/4 inch connections
MF4500 is a MEMS thermal gas mass flow meter with a BSPT inline body. Two models split the range by line size: MF4512 covers 100 to 300 SLPM on a BSPT 1/2″ connection, MF4519 covers 500 to 1000 SLPM on BSPT 3/4″. Both carry an LCD with two indicators and a three-key keypad, showing instant flow rate, totalizer or accumulated flow.
Accuracy is ±(2.0+0.5FS) % over a 50:1 turn-down ratio and the maximum pressure is 1.0 MPa. The temperature coefficient is 0.12 %/°C across a -10 to +55 °C working range, and the pressure effect is quoted as null, so the reading is not shifted by line pressure within the specification. Digital output is RS485 Modbus half-duplex through an HRS DF51K-6P-2DS connector; the meter runs from 8 to 24 Vdc at 50 mA and is rated IP40. Wetted parts are for non-corrosive media, and the unit complies with EN61326-1, -2 and -3.
Choose on the full-scale flow rate (100 to 300 SLPM or 500 to 1000 SLPM), the BSPT connection size that matches the pipe, and the RS485 link to the controller.
Technical data as published in the manufacturer manual (section 7).
| Full-scale flow range (MF4512) | 100, 200, 300 SLPM |
|---|---|
| Full-scale flow range (MF4519) | 500, 800, 1000 SLPM |
| Accuracy | ±(2.0+0.5FS) % |
| Repeatability | (0.5+0.15FS) % |
| Turn-down ratio | 50:1 |
| Working temperature | -10 ~ +55 °C |
| Maximum pressure | 1.0 MPa |
| Humidity | <95, no condensation %RH |
| Power supply | 8 ~ 24 (50 mA) Vdc |
| Temperature coefficient | 0.12 %/°C |
| Pressure effect | Null |
| Digital output | RS485 Modbus half-duplex |
| Electrical connector | HRS: DF51K-6P-2DS (6 positions) |
| MENU access | 3 key – front face keyboard/digital |
| Display | Instant flow rate, totalizer, or accumulated flow rate with LED & 2 indicators |
| Mechanical connection (MF4512) | BSPT 1/2" |
| Mechanical connection (MF4519) | BSPT 3/4" |
| Protection | IP40 |
| Storage temperature | -20 ~ +70 °C |
| Reference conditions | 20°C, 101.325 kPa, air |
| Fluid compatibility | Non-corrosive |
| CE | EN61326-1; -2; -3 |

